rev date: 05/18/2010 15 www.seielect.com this specification may be changed at any time without prior notice marketing@seielect.com please confirm technical specificatio ns before you order and/or use. rpc series pulse withstanding thick film chip resistor stackpole electronics, inc. resistive product solutions features: ? excellent pulse withstanding performance ? broad resistance range ? higher anti-surge performance compared with rmc series ? stability class: 5% ? rohs compliant / lead-free ohmic range ( ? ) and tolerance 5%, 10%, 20% (2) rpc 0603 0.100w 50v 200 ppm/oc 10 - 1m rpc 0805 0.250w 150v 200 ppm/oc rpc 1206 0.330w 200v 200 ppm/oc rpc 1210 0.500w 200v 200 ppm/oc rpc 2010 0.750w 200v 200 ppm/oc rpc 2512 1.000w 200v 200 ppm/oc (1) lesser of pr or maximum working voltage (2) 1% and 0.5% tolerances may be available. contact factory for details and pulse handling information. higher power rating for each package size is valid if ambient temperature is 80oc and terminal temperature is 105oc 0.27 - 22m resistance temperature coefficient type / code power rating (watts) @ 70oc maximum working voltage (1) electrical specifications rpc series single pulse (100 ohm) 1.000 10.000 100.000 1000.000 10000.000 0.0001 0.001 0.01 0.1 1 pulse duration ti (s) pulse power p (w) 0805 1206 1210 2010 2512 nominal resistance 10m type description code wattage tolerance v alues sei types pkg qty description code rpc pulse withstanding 0603 0.100w 5% 0603 5,000 7" reel - paper r 0805 0.250w 10% 10,000 10" reel - paper g 1206 0.330w 20% 5,000 1210 0.500w 1210, 2010, 2512 4,000 2010 0.750w 2512 1.000w e24 0805, 1206 7" reel - paper r rpc 0805 5% a sei type code tolerance packaging how to order
rev date: 05/18/2010 16 www.seielect.com this specification may be changed at any time without prior notice marketing@seielect.com please confirm technical specificatio ns before you order and/or use. rpc series pulse withstanding thick film chip resistor stackpole electronics, inc. resistive product solutions lwh a b body length body width body height top termination bottom termination 0.063 0.004 0.032 0.004 0.018 0.004 0.012 0.008 0.012 0.008 inches 1.60 0.10 0.80 0.10 0.45 0.10 0.30 0.20 0.30 0.20 mm 0.079 0.004 0.049 0.004 0.021 0.004 0.012 0.008 0.016 0.008 inches 2.00 0.10 1.25 0.10 0.55 0.10 0.30 0.20 0.40 0.20 mm 0.126 0.006 0.063 0.006 0.021 0.004 0.012 0.008 0.020 0.010 inches 3.20 0.15 1.60 0.15 0.55 0.10 0.30 0.20 0.50 0.25 mm 0.126 0.006 0.098 0.006 0.021 0.006 0.012 0.008 0.020 0.010 inches 3.20 0.15 2.50 0.15 0.55 0.15 0.30 0.20 0.50 0.25 mm 0.197 0.006 0.098 0.006 0.021 0.006 0.012 0.008 0.024 0.008 inches 5.00 0.15 2.50 0.15 0.55 0.15 0.30 0.20 0.60 0.20 mm 0.248 0.006 0.126 0.006 0.021 0.006 0.012 0.008 0.024 0.008 inches 6.30 0.15 3.20 0.15 0.55 0.15 0.30 0.20 0.60 0.20 mm rpc 1210 rpc 2010 rpc 2512 units rpc 0805 rpc 1206 type / code rpc 0603 mechanical specifications operating temperature range: -55oc to +125oc variation of resistance with temperature overload ? r 1% +0.05 ? no visible damage, legible markings no breakdown or flashover r 1g ohm see ratings table clause 4.8 +20oc/ -55oc / +20oc/ +125oc/ +20oc: rpc 2010, 2512 +20oc/ -55oc/ +20oc/ +155oc/ +20oc: rpc 0603, 0805, 1206, 1210 clause 4.13 the applied voltage shall be 2.5 times of the rated voltage or twice of the limiting element voltage, whichever is the less severe, 2s. test results test test methods (jis c 5201-1 : 1198) voltage proof clause 4.7 500va.a., 60s cycle: -55oc/ +155oc 5 times: rpc 0603, 0805, 1206, 1210 ? r 1% +0.05 ? clause 4.17 235oc, 2s. solderability in accordance with clause 4.17.4.5 ? r 1% +0.05 ? bend of strength of the face plating climatic sequence clause 4.23 dry/damp heat (12+12h cycle), first cycle/ ? r 5% +0.1 ? cold/damp heat (12+12h cycle), remaining cycle / d.c. load no visible damage damp test, steady state ? r 5% +0.1 ? no visible damage, legible markings ? r 1% +0.05 ? clause 4.33 amount of bend: 3mm rpc 0603, 0805 , 1206, 1210 amount of bend: 1mm rpc 2010, 2512 adhesion clause 4.32 5n, 10s no visible damage endurance at the upper category temperature clause 4.25.3 125oc, no load, 1.000h: rpc 2010, 2512 155oc, no load, 1.000h: rpc 0603, 0805, 1206, 1210 ? r 5% +0.1 ? no visible damage endurance @ 70oc clause 4.25.1 rated voltag e, 1.5h "on", 0.5h "off", 70oc, 1,000h ? r 5% +0.1 ? no visible damage resistance to soldering heat rapid change of temperature clause 4.24 40oc, 95% r.h., 56 days, test a) and b) of clause 4.24.2.1 no visible damage clause 4.18 after immersion in to the flux, the immersion into solder shall be carried out in solder bath at 260o for 5s. clause 4.19 cycle: -55oc/ +125oc 5 times: rpc 2010, 2512 performance characteristics
|
